Mondaic
Contact
Skip to content

W-Scan / Getting Started

Prepare Your First W-Scan Project

Start with the experiment you want to model and the result you need. We will help you select the appropriate workflow and get your setup ready.

Access Your Setup

If you already use W-Scan, follow the installation or project access instructions supplied by Mondaic for your deployment. Contact [email protected] if you need those instructions or help opening your project.

New to W-Scan? Request a demonstration and discuss access, including the workflows, instruments, and compute resources relevant to your application.

Gather the Inputs

  • The inspection question and the output you want to obtain
  • Part dimensions, drawings, or a geometry model
  • Known materials and approximate properties
  • The source or probe description and receiver layout
  • For data analysis: instrument model, original acquisition files, and measurement positions

You can start a simulation without measured data. Calibration and measurement-based analysis require suitable recordings and acquisition information. Ask us to confirm supported import formats for your setup.

Plan a First Simulation

  1. Choose a small representative geometry and define the materials.
  2. Set up the probe or source and the receivers for your experiment.
  3. Generate and inspect the mesh, then configure and launch the simulation on the compute resources available to your setup.
  4. Review the wavefield and recorded signals before adding complexity or running a larger parameter study.

Work With Measured Data

For an inspection-analysis workflow, first check the acquisition geometry and data quality. Calibration establishes the source signal and relevant material properties. Imaging or scenario comparisons then address the inspection question.

The sequence and available outputs depend on the workflow. Explore concrete inspection and synthetic data generation for AI, or ask our team to walk through a project with you.

Continue With Support

Include your W-Scan version, deployment, instrument, and the step you need help with when contacting us.