Mondaic
Contact
Skip to content

Applications

Civil Infrastructure Inspection

Image internal features in reinforced concrete, bridges, and civil structures.

Questions We Can Help You Investigate

  • Where are reinforcement, anchors, ducts, and other internal features when drawings are incomplete?
  • Is a tendon duct grouted, or could the measured signal indicate a void?
  • How do geometry, reinforcement, and material properties affect the inspection signals?

From Setup to Interpretation

  1. Step 1

    Describe the Structure and Inspection

    Represent the concrete, reinforcement, known geometry, and inspection device. Include candidate internal features and their possible locations.

  2. Step 2

    Calibrate Against Measurements

    Compare simulated and recorded ultrasonic signals to refine source descriptions and material properties before interpreting internal features.

  3. Step 3

    Image and Interpret Internal Features

    Use waveform inversion or compare candidate scenarios to investigate anchors, reinforcement, voids, and duct conditions. Examine the data fit alongside the resulting images.

How It Works

PT-Duct Inspection

W-Scan classifies the grouting state of post-tensioning ducts by comparing ultrasonic measurements against physically realistic 3D digital twin simulations.

  1. Dry point contact ultrasonic pulse-echo tomograph locating a tendon duct inside a concrete beam
    Dry point contact Ultrasonic pulse-echo tomograph

    01 · MEASURE & MAP

    Acquire on-site data

    Scan the concrete with ultrasonic pulse-echo arrays to detect the exact spatial trajectory of the internal post-tensioning ducts.

  2. Meshed digital twin with simulated waves and alternative duct grouting states
    Dry point contact Ultrasonic pulse-echo tomograph

    02 · SIMULATE

    Run realistic 3D simulations

    Build a digital twin of the concrete asset’s geometry and simulate wave propagation for various potential grouting states - such as fully grouted or voided.

  3. Illustrative grouting assessment along six segments of a tendon duct
    Grouted Voided Uncertain Faded: moderate confidence

    03 · CLASSIFY

    Assess the grouting condition

    Compare the recorded ultrasonic signals with the physical simulations. By finding the closest match, we classify each duct segment as grouted, voided, or uncertain.

Explore PT-Duct Inspection

How it Works

What You Bring as Inputs

Available drawings, structural dimensions, ultrasonic acquisition files, instrument information, and measurement positions. We can help establish missing material and source parameters through calibration.

What You Get as Outputs

Images of internal features and material properties, predicted and measured waveform comparisons, and assessments of candidate conditions such as grouted and ungrouted ducts. The result depends on the measurements and inspection question.

Explore Related Industries

Let's Work Together

Discuss Your Project

Tell us what you need to model or understand. We can help you choose software, plan a study, or work with your measurements.